Hobby-Lobby
NOVAK 14AWG SILICONE POWER WIRE (BLACK/RED/BLUE) (3')
,
Novak 14awg Silicone Power Wire (Black/Red/Blue) (3') Novak 14awg Silicone ...Hobby-Lobby
NOVAK 12AWG SILICONE POWER WIRE (BLACK/RED/BLUE) (3')
,
Novak 12awg Silicone Power Wire (Black/Red/Blue) (3') Novak 12awg Silicone ...Hobby-Lobby
PRO CHARGER PLUS W/POWER SUPPLY US
,
Pro Charger Plus w/Power Supply US Key Features AC/DC compatible ...Hobby-Lobby
SUPER CUB DSM RTF
Wingspan | 47.7 in (1200mm) |
Overall Length | 32.5 in (825mm) |
Flying Weight | 25.2 oz (715g) |
Prop Size | 9 x 6 |
Elevator | Proportional |
Rudder | Proportional |
Throttle | Proportional |
X-Port | Yes |
Anti-Crash Technology | Yes |
Landing Gear | Yes |
Steering | Yes |
Minimum Age Recommendation | 14 years |
Assembly Time | Less than 1 Hour |
Super Cub DSM RTF Highlights:, Spektrum DX4e 4-Channel 2.4GHz DSMX transmitter, Technical Specifications:, Super Cub DSM RTF Specs:, Motor Size:, 480-sized brushed (installed), Servos:, 3W Mini Short Lead Mini Servos, Trim Scheme Colors:, White, blue, and black, Recommended Battery:, 3S 11.1V 1300mAh Li-Po (included), Aileron:No, Flaps:No, Retracts:No, Charger:, DC powered 3S Li-Po balancing charger, Experience Level:, No Experience Necessary,
A Great Way to Learn Flying Now Comes with the ...Hobby-Lobby
AR9110 9-CHANNEL DSMX POWERSAFE RECEIVER
Modulation | DSM2/DSMX |
2.4GHz; Resolution | 2048 |
Length | 1.86 in (47.3mm) |
Width | 1.58 in (40.2mm) |
Height | 0.56 in (14.2mm) |
Weight | 1.2 oz (34g) |
Voltage Range | 6.0-10.0V |
Remote Rx(s) | 30mm (2) |
This unique receiver design contains a main unit which houses the power bus, and it includes 3 remote receivers which come with one of each: 9", 12" and 24" remote receiver extensions. The dual path redundancy of Spektrum's patented DuaLink technology, plus the fact each of the receivers is mounted in a slightly different location, exposes each to a different view of the RF environment and creates a bulletproof RF link in all conditions. You can add an optional fourth remote receiver (SPM9645�sold separately) to further enhance the receiving capabilities of the system for more complex aircraft., Attention: Horizon Hobby has confirmed that all Spektrum Products being sold by KoKo Technology are counterfeit. We consider it a danger to use these products, waive all liability and will not support any warranty or service in regards to them., Attention: It's been confirmed that all Spektrum Products being sold by KoKo Technology are counterfeit. We consider it a danger to use these products, waive all liability and will not support any warranty or service in regards to them. We only sell official Spektrum equipment., Technical Specifications:, AR9110 9-Channel DSMX PowerSafe Receiver Specs, Type:, Full Range Aircraft DSMX Receiver, # of Channels:9, Band:, Antenna Length:,
AR9110 9-Channel DSMX PowerSafe Receiver The AR9110 PowerSafe™ receiver is ...Hobby-Lobby
B6 ULTIMATE 200W BALANCE CHARGER/DISCHARGER FOR 1-6 LITHIUM
Balance charges 1-6 cell Lithium packs at up to 10A 6" x 4-1/2" x 2-1/8". Powerful microprocessor controlled rapid charger for NiCd/NiMH/LiPo/LiIon/LiFe/Pb batteries. The maximum charge power is 200W and maximum charge current is 10A. Comes complete with temperature probe to safely monitor charge temps and terminate charging if temperature exceeds set parameters. Charger monitor program disc is included and the USB cable to connect the charger to your computer allowing the user PC based analysis of the charge process and the health of their battery packs. NOTE: When balance charging Lithium batteries, both the balance tap and the main power wires must be connected to the charger. The balance port connection pins are set at 2.5mm pin spacing and you can balance any pack that has a 2.5mm spacing balance connector, without using an adapter. B6-Ultimate Instruction Manual PDF B6 Ultimate Specs: Operating Voltage Range: 11-18V DC Circuit power: Max charge power 200W, Max discharge power 25W Charging current range: 0.1A -10A Discharge current range: 0.1A-5.0A Current drain for balancing: 200mA/cell LiPo/LiFe/LiIon Cell Count: 1-6 cells NiMH/MiCd: 1-18 cells Pb charging: 2V-24V USB Port: 5V 1A continuous Weight: 21.41 oz. (607g), ,
Balance charges 1-6 cell Lithium packs at up to 10A ...Hobby-Lobby
B6-PRO 80 WATT BALANCE CHARGER FOR 1-6 LIPO CELLS
Balance charges 1-6 Lithium cells at up to 5A 5-5/8" x 3-3/8" x 1-3/8". Multi-use charger for 1-6 Li-Ion/LiPo/LiFe cells, 1-15 NiCd/NiMH cells, and Pb 2-20V. Includes adapters for "Deans" style plugs, JST, Rx pack, glow plug lighter, and alligator clips. Balance plugs on end of unit are JST-XH type and are compatible with many Asian battery packs. NOTE: when balance charging Lithium batteries, both the balance tap and the main power wires must be connected to the charger. B6-Pro Instruction Manual PDF B6-Pro Includes: Internal independent lithium battery balancer: Employs an individual-cell-voltage balancer to maintain your pack in balance while charging. Balance individual cells during discharge: During the discharge process, B6-Pro can monitor and balance each cell of the pack individually. An error message will sound and the process will end automatically if the voltage of any single cell is abnormal. Fast and Storage mode charging: "Fast" charge will fully charge a lipoly battery in the shortest time. "Store" setting will charge the battery at approximately a 50% charge for long term storage. This prolongs the useful life of the battery pack. Charges various types of LiPoly cells: Includes charging programs for LiFe (A123), Li-Ion, and LiPo battery types. Data store/load: Up to 5 batteries' data can be stored for easy programming. Cyclic charging/discharging: 1-5 cycles of either charge>discharge or dischage>charge is possible. B6-Pro Specs: Operating voltage range: DC 11.0~18.0 Volt Circuit power: Max. charge power 80W Charge current range: 0.1~5.0A Discharge current range: 0.1-2.0A Current drain for balancing Li-po: 300 mAh/cell NiCd/NiMH battery cell count: 1-15 cells Li-ion/Polymer cell count: 1-6 series Pb battery voltage: 2V, 20V, ,
Balance charges 1-6 Lithium cells at up to 5A 5-5/8" ...Hobby-Lobby
40 WATT BALANCE CHARGER FOR 1-4 LITHIUM CELLS
Simple Inexpensive 1-4 cell Lithium balance charger 4-3/4" x 2-9/16" x 1-3/16". Charges Lithium Polymer, Ion and LiFe (a123) cells up to a maximum of 4S and 3.5A rate when connected to a 12V DC power source. Integrated balance circuit and large LCD display showing voltage, current, capacity and charging time. Includes input lead with alligator clips to attach to a 12V battery and an output lead with 3.5mm banana plugs to connect to the charger. You will need to solder the mating connector for your battery type to the output connector. For use with up to 4S JST-XH balance plug (2.5mm pin spacing). These plugs are on our current RTF, ARF models and our Powerwing Lipos. Balance adapters SRC510, SRC513, SRCH0132, and SRCH0133 will not fit this charger, they are designed for a 6-cell charger. 40 Watt Balance Charger Specs: Input voltage: 11-15 Volt DC No. of cells: 1-4 Battery type: LiPo/LiIon/LiFe (a123) Charge current: 0.1-3.5A (40W) LCD type: Voltage, Current, Capacity, Charging Time and Battery Type Weight: 6.4 oz. (180g), ,
Simple Inexpensive 1-4 cell Lithium balance charger 4-3/4" x 2-9/16" ...Hobby-Lobby
B6 DUO TWO-200W BALANCE CHARGERS IN ONE
Jason Says: "What do you get when you stuff two 200W chargers in box? This charger. Works great for charging those huge batteries used in giant scale aircraft." Less time charging---More time flying 8" x 5-1/2" x 2-1/4". Two powerful microprocessor controlled rapid chargers for NiCd/NiMH/LiPo/LiIon/LiFe/Pb batteries together in one compact unit. The maximum charge power is 400W (200W x 2) and maximum charge current is 10A each. Each charger is independent and can charge completely different battery types at the same time. Charger has a cross ventilating temperature controlled cooling fan. Comes complete with 1 temperature probe to safely monitor battery charge temps and terminate charging if temperature exceeds set parameters. Charger monitor program disc is included and the USB cable to connect the charger to your computer, allowing the user PC-based analysis of the charge process and the health of their battery packs (charge port #1 only). The charge also includes a USB power supply 5V/1A suitable for charging your FlyCam, cell phone or running your iPod. NOTE: when balance charging Lithium batteries, both the balance tap and the main power wires must be connected to the charger. B6 Duo Two-200W Includes: Dual 200W balance charger w/4mm banana plug inputs 2-battery clamp adapters (for use when powering charger from auto battery 2-XH Balance Adpaters 2-Banana plug charge leads (solder the connector of your choice) 1-Banana plug to Alligator clip connector 1-Temp Sensor Charge monitor software disc (PC only) and USB to Mini USB cable Instruction manual (English) B6 Duo Two-200W Specs: Operating voltage range: 11-18V DC Circuit power (each): Max charge power 200W - Max discharge power 25W Charging current range: 0.1A -10A (2 x 200W max.) Discharge current range: 0.1A-5.0A (2 x 25W max.) Current drain for balancing: 200mA/cell LiPo/LiFe/LiIon Cell Count: 1-6 cells NiMH/MiCd: 1-18 cells Pb charging 2V-24V USB Port: 5V 1A continuous Weight: 727g, ,
Jason Says: "What do you get when you stuff two ...Hobby-Lobby
CELECTRA 4-PORT SINGLE-CELL 3.7V DC LIPO CHARGER
Type | 4-Port 1-Cell 3.7V 0.3A DC LiPo Charger |
Input | 4 D-size batteries or optional E-flite 6V 1.5-Amp AC/DC Power Supply (EFLC1005) |
# Cells | 1 to 4 single cell Li-Po |
Battery Type | Lithium Polymer |
E-Flite Celectra Features:, Four independently functioning charging circuits to charge your single-cell LiPo batteries, Celectra Charger Specs:, LED: 4,
Fast and Easy Way to Charge Ultra-Micro Batteries Fast and ...Hobby-Lobby
150 WATT BALANCE CHARGER FOR 1-8 LITHIUM CELLS
Technical Specifications | 150 Watt Balance Charger for 1-8 Lithium Cells Specs |
Circuit power | Max charge power 150W |
Charging current range | 0.1A -7A |
Discharge current range | 0.1A-5.0A |
Current drain for balancing | 300mA/cell |
LiPo/LiFe/LiIon Cell Count | 1-8 cells |
NiMH/NiCd | 1-27 cells |
Pb charging | 2V-36V |
Weight | 480g |
Dimensions | 6-7/16 in. x 4-3/16 in. x 1-3/4 in. |
,
Charge up to 8 cells at up to 7A at ...Hobby-Lobby
CELECTRA 4-PORT SINGLE-CELL 3.7V DC LIPO CHARGER
Type | 4-Port 1-Cell 3.7V 0.3A DC LiPo Charger |
Input | 4 D-size batteries or optional E-flite 6V 1.5-Amp AC/DC Power Supply (EFLC1005) |
# Cells | 1 to 4 single cell Li-Po |
Battery Type | Lithium Polymer |
E-Flite Celectra Features:, Four independently functioning charging circuits to charge your single-cell LiPo batteries, Celectra Charger Specs:, LED: 4,
Fast and Easy Way to Charge Ultra-Micro Batteries Fast and ...Hobby-Lobby
X4 FOUR-CHANNEL DC MULTICHARGER
Input | DC 11 - 15V |
Needed to Complete | Power supply (20A minimum) |
X4 Four-Channel DC Multicharger Highlights:, Type:, 4-Channel Multicharger, # Cells:, 1-6 Cells LiPo/LiFe, 1-15 Cells NiMH/NiCD, 2-20V Pb, Current Discharge:, 0.1 - 1.0A (up to 5W [total units 20W]), Charge Rate:, 0.1 - 6.0A (up to 50W [total units 200W]), Battery Type:, LiPo, LiFe, Li-ION, NiCD, NiMH, Pb, Cooling Method:, Sensored twin cooling fans, Dimensions (WxLxH):, 225.4 x 158.6 x 62.4mm,
X4 Four-Channel DC Multicharger The Hitec X4 Multicharger is a ...Hobby-Lobby
10 WATT LIPO BALANCE CHARGER FOR 2-3 LITHIUM CELLS
Technical Specifications | 10 Watt Lipo Balance Charger for 2-3 Lithium Cells Specs |
Input voltage range | Max charge power 10W |
Circuit power | 0.8mAH |
Charging current range | 2-3 cells |
LiPo Cell Count | 10W E3 balance charger with XH balance plugs for 2and 3 cell batteries |
Charge Cut Off | Automatic |
Dimensions | 4-5/8 in. x 3-3/16 in. x 2-3/8 in. |
,
The easiest way to charge 2-3 LiPo cells It doesn't ...